木托盘材料的要求：

Requirements for wood tray materials:

木板：严格的长度、宽度要求，厚度22毫米；

Board: strict length and width, thickness 22 mm;

钉子：采用具有环状纹路的钉子，提升拉拔力;

Nails: use the nail with ring pattern to improve drawing force.

钉位：所有的托盘的钉位都一致；

Nail position: all the pallets have the same nailed position.

角块：极端耐热耐寒，不是谁都能提供，由通过考核的供应商提供；

Corner block: extreme heat and cold resistance, not everyone can provide, provided by the supplier through examination.

倒棱处理：保证叉车作业时货叉出入的平滑顺利。

Chamfering treatment ensures smooth and smooth entry and exit of forklift trucks.

木托盘成品的质量检验：

Quality inspection of wooden pallet finished products:

检查托盘的维修检验工具（检验工具要进行度量衡校准）；

Check the maintenance and inspection tools for pallets (inspection tools should be calibrated by weights and measures).

托盘长度：2处测量，比较多允许一处数据有偏差；

Pallet length: 2 measurements, allowing at most one data deviation.

托盘宽度：2处测量，比较多允许一处数据有偏差；

Pallet width: 2 measurements, allowing at most one data deviation.

纵梁的板厚：3处测量，比较多允许一处数据有偏差；

The thickness of the longitudinal beam is measured at 3 locations, allowing at most one data deviation.

纵梁的宽度：3处测量，比较多允许一处数据有偏差；

The width of the longitudinal beam is measured at 3 locations, allowing at most one data deviation.

除纵梁外的其它的木质部件，长宽厚任一数据的测量。

Except for the other wooden parts outside the longitudinal beam, the measurement of any data is long and wide.

三维检查，主要检查托盘组装是否水平。

Three dimensional inspection mainly checks whether the pallet is assembled horizontally.

在托盘发货前用带有缘测量针的电子湿度计进行木材的水分含量检查。

The moisture content of the wood is checked with an electronic hygrometer with an insulating needle before the pallet is shipped.